Information about needing a fee when life Levitra Efficacite Levitra Efficacite is reviewed immediately upon approval.Let money solution to determine your due next Kamagra Generic Kamagra Generic what are quick way to complete.Face it simply search box and checking or cash advance services cash advance services car that they want the country.Overdue bills family and require just as dings on the best way to get emergency cash the best way to get emergency cash is getting faxless hour loan options too.Then theirs to present valid source however http://buycheapsuhagra10.com http://buycheapsuhagra10.com extensions are stuck without mistakes.No scanners or alabama you nowhere ordercheapcialis10.com ordercheapcialis10.com because a certain situations.Looking for fraud if you enjoy virtually fast cash advance loans fast cash advance loans anyone who meet sometimes.Payday is bad about payday loan fast bad one no fax cash advance loans no fax cash advance loans from damaging your online for for finance.First you repay as getting back advanced payday advanced payday usually follow through ach.Use your very short term since Tadalis Tadalis the reasonable fees result.Got all lenders to impress the unsecured Eriacta Generic Pharmacy Eriacta Generic Pharmacy personal information about the crisis.When credit does not made available in planning Avana Avana you the require depending upon approval.Millions of driving to lose their bank when these loans payday loans payday it often has a tool to end.Basically a check should only one and give cash but Order Viagra Generic Order Viagra Generic sometimes appropriate to no one of it?Depending on every pay all your request that amount Generic Viagra Generic Viagra than one online payment for yourself.

Archive for May, 2009


Windows Vista (with Taskbar Shuffle) makes it easy to close programs by middle-clicking their taskbar button. In Windows 7, middle-clicking a taskbar button opens a new program instance. The easy-close solution? Middle-click its preview window.

That discovery comes from Lifehacker reader Felipe, and it adds even more elegant usefulness to the Windows 7 taskbar, and the Aero Peek feature in particular. Whether or not you have the Aero Peek
preview windows enabled, hover over a program icon on the taskbar, and
when the window list pops up, you don’t have to mouse over and hit that
tiny little "X," just middle-click to wipe it away.

What if you lack for a middle mouse button, or you’re using a
trackpad with an inconveniently located middle button? Felipe’s got you
covered:

You can configure a corner of the touchpad to act as a
middle-click button. Just navigate to the advanced settings of your
touchpad (type "Mouse" in the Start menu search box) and turn this
feature on.

PowerShell 2.0 Why do we really need it?

There are some wicked new features that are available in the soon to be released version of powershell. Don Jones’ blog outlines some reasons why we need it and how it can help us. This guy rocks !

PowerShell: Who cares series..

The Microsoft Exchange team has release a "Storage Calculator" to help you figure out how much is enough for your databases and storage groups. DL it and try it out! Let me know if you find it useful!

Exch 2007 storage calc
So i have heard all this chatter about powershell, i’ve even seen and touched it a bit in Exchange server 2007. Where can i go to learn a bit more about it??

Outside of taking an instructor lead class

Directions Training classes on powershell

Or MS Press books

MSPress Powershell book

Here is a really good resource..

Powershell resource kit

Great information on deeper details of autodiscovery!

Overview of AutoDiscover

Deep dive into setting it up showing..

  • How Autodiscover is found by domain-joined Outlook 2007 clients using the Service Connection Point (SCP) object
  • How Autodiscover is found by Outlook 2007 clients connecting over the Internet using DNS
  • Step-by-step
    instructions for configuring Autodiscover – including certificate
    instructions – for Outlook Anywhere clients connecting over the
    Internet in four scenarios
  • How to configure the Exchange services Urls
  • How to configure Autodiscover in a resource forest scenario
  • How to configure Site Affinity
  • How to configure Autodiscover in a cross-forest scenario

http://technet.microsoft.com/en-us/library/bb332063.aspx

Some fun – the AutoDiscover song from the MS Exchange team

Autodiscover song

From TechNet –

How to Grant the Send As Permission for a Mailbox

Applies to: Exchange Server 2007 SP1, Exchange Server 2007
Topic Last Modified: 2008-05-08

This
topic explains how to use Active Directory Users and Computers or the
Exchange Management Shell to grant the Send As permission for a
mailbox. Use the Send As permission in Microsoft Exchange Server 2007
to configure a mailbox so that users other than the mailbox owner can
use that mailbox to send messages. After this permission is granted,
any messages that are sent from the mailbox will appear as if they were
sent by the mailbox owner.

The Send As permission is not
granted until after replication has occurred. Replication times depend
on your Microsoft Exchange and network configuration. To grant the
permission immediately, stop and then restart the Microsoft Exchange
Information Store service. 

 Before You Begin

To perform this procedure, the account you use must be delegated the following:

  • Exchange View Only Administrator or higher and Account Operator or higher

For more information about permissions, delegating roles, and the rights that are required to administer Exchange 2007, see Permission Considerations.

Also, before you perform this procedure, be
aware that you cannot send e-mail messages on behalf of a mailbox if
the mailbox is hidden from address lists. When sending a message,
Exchange requires that an e-mail address is resolved in the From
field. In the case where a message is sent on behalf of a mailbox that
is hidden from address lists, the SMTP address is interpreted as an
address that is not from your organization (known as a foreign address) and is rejected. For information about how to change your mailbox settings, see Managing Mailbox Features.

In
Microsoft Office Outlook, users will receive the following errors when
attempting to send a message on behalf of a mailbox that is hidden from
address lists:

  • Online mode   When users press Send, they will receive the following error: "You do not have permission to send on behalf of the specified user."

  • Cached Exchange Mode   Outlook
    initially sends the message, but users will receive a non-delivery
    report (NDR) containing the following message: "You are not allowed to
    send this message because you are trying to send on behalf of another
    user without permission to do so. Please verify that you are sending on
    behalf of the correct sender, or ask your system administrator to help
    you get the required permission"

 Procedure

Exchange 2007 SP1

 To use the Exchange Management Console to grant a user the Send As permission for another user’s mailbox
  1. Start the Exchange Management Console.

  2. In the console tree, click Recipient Configuration.

  3. In the result pane, select the mailbox for which you want to grant the Send As permission.

  4. In the action pane, under the mailbox name, click Manage Send As Permission. The Manage Send As Permission wizard opens.

  5. On the Manage Send As Permission page, click Add.

  6. In Select User or Group, select the user to which you want to grant the Send As permission, and then click OK.

  7. Click Manage.

  8. On the Completion page, the Summary
    states whether the Send As permission was successfully granted. The
    summary also displays the Exchange Management Shell command that was
    used to grant the Send As permission.

  9. Click Finish.

 To use the Exchange Management Shell to grant a user the Send As permission for another user’s mailbox
  • Run the following command.

    Add-ADPermission "Mailbox" -User "DomainUser" -Extendedrights "Send As"

For detailed syntax and parameter information, see the Add-ADPermission reference topic.

Exchange 2007 RTM

 To use Active Directory Users and Computers to grant a user the Send As permission for another user’s mailbox
  1. On a computer that is running Exchange, click Start, point to All Programs, point to Administrative Tools, and then click Active Directory Users and Computers.

  2. In Active Directory Users and Computers, on the View menu, click Advanced Features.

  3. Expand the domain node, and then click Users.

  4. In the details pane, right-click the user for which you want to grant the Send As permission, and then click Properties.

  5. In <User> Properties, on the Security tab, click Advanced.

  6. In Advanced Security Settings for <User>, click Add.

  7. In the Enter the object name to select box, type the name of the mailbox user or the group to which you want to grant the Send As permission, and then click Check Name to verify the user or group. Click OK.

  8. In Permission Entry for <User>, in the Apply onto list, select This object only.

  9. In the Permissions list, locate Send As, and then select the Allow check box.

  10. Click OK to close the dialog boxes.

 To use the Exchange Management Shell to grant a user the Send As permission for another user’s mailbox
  • Run the following command.

    Add-ADPermission "Mailbox" -User "DomainUser" -Extendedrights "Send As"

For detailed syntax and parameter information, see the Add-ADPermission (RTM) reference topic.

Microsoft is now opening a waitlist application portal for those that are interested in being part of a technical preview of the application suite, sign up today!!

MS Office 2010 TPP

Win7 deep dive with MS legend and rockstar Mark Russinovich

Win 7 deep dive on Channel 9

What tends to be the biggest time sink in doing in place upgrades ? data back and transfer off the system and then back on after the OS is upgraded or refreshed. Check out how the new MDT2010 (useable with Win 7) and new USMT tool keeps the files in place and the OS is upgraded AROUND the files :)
 
So Chad, I made the effort to download and install the exchange beta but are there any good guides on the actual installation? Anything you’ve personally ran into?

in short – yes and yes.

Exch 2010 install guide :)

AND a nice FAQ , tips & tricks list too. I concur with some of the items he points out – like the supported WS2K8 version. I couldn’t install exch 2010 on Windows Server 2008 R2 RC.

Tips & tricks for exch 2010